- Size all ten nails with the NSI Soft Gel Tips to fit your client's nails before product application.
- Choose the correct size by measuring from sidewall to sidewall. It is always better to size up and slightly retail for a proper fit. For the best fit, apply medium pressure over the nail to check the contact area and contours of the tips.
- Apply Essential Bond Enhancer to the natural nail on all ten fingers to promote adhesion.
- Apply Essential Bond to the natural nail and allow it to dry for one minute. The nails will not appear chalky white.
- Place a small line of Soft Gel Tip Adhesive on the inside of the tip at the cuticle area.
- Hold the tip at a 45-degree angle from the cuticle area with constant pressure to the free edge. Roll the tip into place and apply even downward pressure to force out all air bubbles.
- Flash cure for 5 seconds under the NSI Flash Cure Nail Light, holding firmly the NSI Soft Gel Tip in place to maintain a good seal. Repeat on the other fingers to complete one full hand. When tips have been applied to all five fingers, cure for 60 seconds in the NSI Dual Cure Elite LED/UV Nail Lamp.
NSI Soft Gel Tip Adhesive 15ml 0841-12
Regular price
$37.95
The NSI Soft Gel Tips System effortlessly creates robust, beautiful nail enhancements without sculpting.
- Cut your service time in half with the NSI Soft Gel Tips.
- Now, it’s as easy as picking your desired shape!
- Apply NSI’s Soft Gel Tip Adhesive and cure for 60 seconds.
- It brushes on like Gel polish and cures for 60 seconds in a UV/LED lamp or the NSI Flash Cure LED lamp for robust and lasting nail enhancements.
- The Soft Gel Tip Adhesive creates a strong, lasting bond that prevents the NSI Soft Gel Tips from lifting or breaking.
- The Soft Gel Tip Adhesive can be used for infills with the Soft Gel Tip System.
Use the Soft Gel Tip Adhesive as the nails grow out to infill the enhancement rather than soaking it off and starting fresh. Alternatively, it can be soaked off for removal.
Try the NSI Soft Gel Tip System!
- Adhesive for use with the NSI Soft Gel Tip System
- Quick and easy to apply and lasts for weeks
- Can be soaked off or filed off for removal
- Cures for 60 seconds in a UV/LED lamp
- Use with the NSI Flash Cure LED lamp
- It can be used to refill the Soft Gel Tip System as the nails grow out
Instructions:
The NSI Soft Gel Tips System effortlessly creates robust, beautiful nail enhancements without sculpting.
- Cut your service time in half with the NSI Soft Gel Tips.
- Now, it’s as easy as picking your desired shape!
- Apply NSI’s Soft Gel Tip Adhesive and cure for 60 seconds.
- It brushes on like Gel polish and cures for 60 seconds in a UV/LED lamp or the NSI Flash Cure LED lamp for robust and lasting nail enhancements.
- The Soft Gel Tip Adhesive creates a strong, lasting bond that prevents the NSI Soft Gel Tips from lifting or breaking.
- The Soft Gel Tip Adhesive can be used for infills with the Soft Gel Tip System.
Use the Soft Gel Tip Adhesive as the nails grow out to infill the enhancement rather than soaking it off and starting fresh. Alternatively, it can be soaked off for removal.
Try the NSI Soft Gel Tip System!
- Adhesive for use with the NSI Soft Gel Tip System
- Quick and easy to apply and lasts for weeks
- Can be soaked off or filed off for removal
- Cures for 60 seconds in a UV/LED lamp
- Use with the NSI Flash Cure LED lamp
- It can be used to refill the Soft Gel Tip System as the nails grow out
Instructions:
- Size all ten nails with the NSI Soft Gel Tips to fit your client's nails before product application.
- Choose the correct size by measuring from sidewall to sidewall. It is always better to size up and slightly retail for a proper fit. For the best fit, apply medium pressure over the nail to check the contact area and contours of the tips.
- Apply Essential Bond Enhancer to the natural nail on all ten fingers to promote adhesion.
- Apply Essential Bond to the natural nail and allow it to dry for one minute. The nails will not appear chalky white.
- Place a small line of Soft Gel Tip Adhesive on the inside of the tip at the cuticle area.
- Hold the tip at a 45-degree angle from the cuticle area with constant pressure to the free edge. Roll the tip into place and apply even downward pressure to force out all air bubbles.
- Flash cure for 5 seconds under the NSI Flash Cure Nail Light, holding firmly the NSI Soft Gel Tip in place to maintain a good seal. Repeat on the other fingers to complete one full hand. When tips have been applied to all five fingers, cure for 60 seconds in the NSI Dual Cure Elite LED/UV Nail Lamp.
PRODUCT INSTRUCTIONS:
Regular price
$37.95
The NSI Soft Gel Tips System effortlessly creates robust, beautiful nail enhancements without sculpting.
- Cut your service time in half with the NSI Soft Gel Tips.
- Now, it’s as easy as picking your desired shape!
- Apply NSI’s Soft Gel Tip Adhesive and cure for 60 seconds.
- It brushes on like Gel polish and cures for 60 seconds in a UV/LED lamp or the NSI Flash Cure LED lamp for robust and lasting nail enhancements.
- The Soft Gel Tip Adhesive creates a strong, lasting bond that prevents the NSI Soft Gel Tips from lifting or breaking.
- The Soft Gel Tip Adhesive can be used for infills with the Soft Gel Tip System.
Use the Soft Gel Tip Adhesive as the nails grow out to infill the enhancement rather than soaking it off and starting fresh. Alternatively, it can be soaked off for removal.
Try the NSI Soft Gel Tip System!
- Adhesive for use with the NSI Soft Gel Tip System
- Quick and easy to apply and lasts for weeks
- Can be soaked off or filed off for removal
- Cures for 60 seconds in a UV/LED lamp
- Use with the NSI Flash Cure LED lamp
- It can be used to refill the Soft Gel Tip System as the nails grow out
Instructions:
- Size all ten nails with the NSI Soft Gel Tips to fit your client's nails before product application.
- Choose the correct size by measuring from sidewall to sidewall. It is always better to size up and slightly retail for a proper fit. For the best fit, apply medium pressure over the nail to check the contact area and contours of the tips.
- Apply Essential Bond Enhancer to the natural nail on all ten fingers to promote adhesion.
- Apply Essential Bond to the natural nail and allow it to dry for one minute. The nails will not appear chalky white.
- Place a small line of Soft Gel Tip Adhesive on the inside of the tip at the cuticle area.
- Hold the tip at a 45-degree angle from the cuticle area with constant pressure to the free edge. Roll the tip into place and apply even downward pressure to force out all air bubbles.
- Flash cure for 5 seconds under the NSI Flash Cure Nail Light, holding firmly the NSI Soft Gel Tip in place to maintain a good seal. Repeat on the other fingers to complete one full hand. When tips have been applied to all five fingers, cure for 60 seconds in the NSI Dual Cure Elite LED/UV Nail Lamp.
PRODUCT INSTRUCTIONS:
The NSI Soft Gel Tips System effortlessly creates robust, beautiful nail enhancements without sculpting.
- Cut your service time in half with the NSI Soft Gel Tips.
- Now, it’s as easy as picking your desired shape!
- Apply NSI’s Soft Gel Tip Adhesive and cure for 60 seconds.
- It brushes on like Gel polish and cures for 60 seconds in a UV/LED lamp or the NSI Flash Cure LED lamp for robust and lasting nail enhancements.
- The Soft Gel Tip Adhesive creates a strong, lasting bond that prevents the NSI Soft Gel Tips from lifting or breaking.
- The Soft Gel Tip Adhesive can be used for infills with the Soft Gel Tip System.
Use the Soft Gel Tip Adhesive as the nails grow out to infill the enhancement rather than soaking it off and starting fresh. Alternatively, it can be soaked off for removal.
Try the NSI Soft Gel Tip System!
- Adhesive for use with the NSI Soft Gel Tip System
- Quick and easy to apply and lasts for weeks
- Can be soaked off or filed off for removal
- Cures for 60 seconds in a UV/LED lamp
- Use with the NSI Flash Cure LED lamp
- It can be used to refill the Soft Gel Tip System as the nails grow out
Instructions:
- Size all ten nails with the NSI Soft Gel Tips to fit your client's nails before product application.
- Choose the correct size by measuring from sidewall to sidewall. It is always better to size up and slightly retail for a proper fit. For the best fit, apply medium pressure over the nail to check the contact area and contours of the tips.
- Apply Essential Bond Enhancer to the natural nail on all ten fingers to promote adhesion.
- Apply Essential Bond to the natural nail and allow it to dry for one minute. The nails will not appear chalky white.
- Place a small line of Soft Gel Tip Adhesive on the inside of the tip at the cuticle area.
- Hold the tip at a 45-degree angle from the cuticle area with constant pressure to the free edge. Roll the tip into place and apply even downward pressure to force out all air bubbles.
- Flash cure for 5 seconds under the NSI Flash Cure Nail Light, holding firmly the NSI Soft Gel Tip in place to maintain a good seal. Repeat on the other fingers to complete one full hand. When tips have been applied to all five fingers, cure for 60 seconds in the NSI Dual Cure Elite LED/UV Nail Lamp.