NSI HD 3D Nail Art Brush 1494

$41.95
Description

The high-quality 3D Acrylic Nail Art Brush helps you create beautifully detailed designs and 3D Nail art. This brush has been carefully tested by our top technicians for usability and comfort. Combine with the other NSI Brushes for a complete  Tool Kit!

When creating 3D Acrylic Nail Art with colored Acrylic Powders, use the HD 3D Brush for ideal results. The high-quality HD 3D Detail Brush helps you create beautifully detailed designs and 3D Nail art. The pointed Brush tip aids in picking up tiny beads of Nail Liquid for exceptional control when making small, detailed designs.

  • High-quality brush for the creation of nail art
  • The pointed Brush tip aids in the creation of detailed nail art and 3D designs.
  • Ergonomically designed to be held comfortably in your hand for perfect balance and comfort while in use.
  • Made from pure Kolinsky sable hair
  • This brush's size is perfect for picking up tiny beads of Nail Liquid.
  • The vented cap protects the brush during storage and travel while allowing air circulation and acts as a handle extender.

Important Steps:
Clean brush hair with Brush Cleaner to prevent the product from hardening between the bristles.

BRUSH CARE:

  1. Before using your brush, remove the protective coating that keeps brush hairs in place during shipping. Hold an NSI nail wipe between your thumb and fingers and gently massage the hairs to break the stiffness and release the protective coating.
  2. Place a small amount of Brush Cleaner into a clean dappen dish. Immerse the brush hairs in the liquid and apply firm pressure to spread them. Then, rock from side to side. Make sure each hair is coated with brush cleaner. This will ensure that any air between the brush hairs is eliminated.
  3. Shape and clean the brush with a clean towel. Roll the brush to a natural tapered point. Do not use your fingers; never touch the hairs on any skin, as this could lead to brush contamination and overexposure. To keep and maintain the shape of your brush, follow steps 2 and 3. If any hairs snap out of shape, cut at the base of the hair and never pluck, as this may lead to voids in the ferrule.
  4. Do not re-use the Brush Cleaner. Dispose of the liquid and make sure the dappen dish is clean.
  5. Use Brush Cleaner only to clean your brush. Do not wash in soap and water or acetone, as these substances could dry out your brush. If your brush clogs, saturate it in brush cleaner until the hairs are softened, and then guide the brush through an NSI Nail Wipe until it is clean and free of hardened material.
  6. Place the vented cap over the brush hair for storage. Store horizontally, not upright, as excess monomer will drain into the brush's ferrule and get tacky as it evaporates. This tacky material will go directly into the fresh monomer when you collect a new bead, resulting in possible yellowing that could be a sign of contamination.

Brush Care:

  1. Before using your brush, remove the protective coating that keeps brush hairs in place during shipping. Hold a nail wipe between your thumb and fingers, and gently massage the hairs to break the stiffness and release the protective coating.
  2. Place a small amount of Brush Cleaner into a clean Dappen Dish. Immerse the brush hairs in the liquid and apply firm pressure to spread them. Then, rock from side to side. Make sure each hair is coated with brush cleaner. This will ensure that any air between the brush hairs is eliminated.
  3. Shape and clean the brush with a clean towel. Roll the brush to a natural tapered point. Do not use your fingers; never touch the hairs on any skin, as this could lead to brush contamination and overexposure. To keep and maintain the shape of your brush, follow steps 2 and 3. If any hairs snap out of shape, cut at the base of the hair and never pluck, as this may lead to voids in the ferrule.
  4. Do not re-use the Brush Cleaner. Dispose of the liquid and make sure the dappen dish is clean.
  5. Use Brush Cleaner only to clean your brush. Do not wash in soap and water or acetone, as these substances could dry out your brush. If your brush clogs, saturate it in brush cleaner until the hairs are softened, and then guide the brush through a Nail Wipe until it is clean and free of hardened material.

Instruction:

VIDEO DEMOS:

STEP-BY-STEP DEMOS:

The high-quality 3D Acrylic Nail Art Brush helps you create beautifully detailed designs and 3D Nail art. This brush has been carefully tested by our top technicians for usability and comfort. Combine with the other NSI Brushes for a complete  Tool Kit!

When creating 3D Acrylic Nail Art with colored Acrylic Powders, use the HD 3D Brush for ideal results. The high-quality HD 3D Detail Brush helps you create beautifully detailed designs and 3D Nail art. The pointed Brush tip aids in picking up tiny beads of Nail Liquid for exceptional control when making small, detailed designs.

  • High-quality brush for the creation of nail art
  • The pointed Brush tip aids in the creation of detailed nail art and 3D designs.
  • Ergonomically designed to be held comfortably in your hand for perfect balance and comfort while in use.
  • Made from pure Kolinsky sable hair
  • This brush's size is perfect for picking up tiny beads of Nail Liquid.
  • The vented cap protects the brush during storage and travel while allowing air circulation and acts as a handle extender.

Important Steps:
Clean brush hair with Brush Cleaner to prevent the product from hardening between the bristles.

BRUSH CARE:

  1. Before using your brush, remove the protective coating that keeps brush hairs in place during shipping. Hold an NSI nail wipe between your thumb and fingers and gently massage the hairs to break the stiffness and release the protective coating.
  2. Place a small amount of Brush Cleaner into a clean dappen dish. Immerse the brush hairs in the liquid and apply firm pressure to spread them. Then, rock from side to side. Make sure each hair is coated with brush cleaner. This will ensure that any air between the brush hairs is eliminated.
  3. Shape and clean the brush with a clean towel. Roll the brush to a natural tapered point. Do not use your fingers; never touch the hairs on any skin, as this could lead to brush contamination and overexposure. To keep and maintain the shape of your brush, follow steps 2 and 3. If any hairs snap out of shape, cut at the base of the hair and never pluck, as this may lead to voids in the ferrule.
  4. Do not re-use the Brush Cleaner. Dispose of the liquid and make sure the dappen dish is clean.
  5. Use Brush Cleaner only to clean your brush. Do not wash in soap and water or acetone, as these substances could dry out your brush. If your brush clogs, saturate it in brush cleaner until the hairs are softened, and then guide the brush through an NSI Nail Wipe until it is clean and free of hardened material.
  6. Place the vented cap over the brush hair for storage. Store horizontally, not upright, as excess monomer will drain into the brush's ferrule and get tacky as it evaporates. This tacky material will go directly into the fresh monomer when you collect a new bead, resulting in possible yellowing that could be a sign of contamination.

Brush Care:

  1. Before using your brush, remove the protective coating that keeps brush hairs in place during shipping. Hold a nail wipe between your thumb and fingers, and gently massage the hairs to break the stiffness and release the protective coating.
  2. Place a small amount of Brush Cleaner into a clean Dappen Dish. Immerse the brush hairs in the liquid and apply firm pressure to spread them. Then, rock from side to side. Make sure each hair is coated with brush cleaner. This will ensure that any air between the brush hairs is eliminated.
  3. Shape and clean the brush with a clean towel. Roll the brush to a natural tapered point. Do not use your fingers; never touch the hairs on any skin, as this could lead to brush contamination and overexposure. To keep and maintain the shape of your brush, follow steps 2 and 3. If any hairs snap out of shape, cut at the base of the hair and never pluck, as this may lead to voids in the ferrule.
  4. Do not re-use the Brush Cleaner. Dispose of the liquid and make sure the dappen dish is clean.
  5. Use Brush Cleaner only to clean your brush. Do not wash in soap and water or acetone, as these substances could dry out your brush. If your brush clogs, saturate it in brush cleaner until the hairs are softened, and then guide the brush through a Nail Wipe until it is clean and free of hardened material.

Instruction:

VIDEO DEMOS:

STEP-BY-STEP DEMOS: