NSI Nail Steamer Remover 802
The NSI Nail Steamer Remover removes nail products such as Acrylics, rubber base, Gel Polish, manicures, Nail Dipping Systems, and more. It is a must-have tool for any nail technician!
The NSI Nail Steamer Remover is designed to make removing gel polish simple and painless. The gel Steamer Remover heats and warms up your Soak Off Remover to speed up the removal of enhancement products. It is an excellent addition to any salon and a pampering upgrade from the old ways of removing nail products by soaking or wrapping them with foil—no more scraping and scrubbing to get your client's nails back to their natural state. After just a few minutes, you can easily wipe away the product. Then, the nails are ready for a new look.
It works by gently heating the Soothing Soak-Off Remover to speed up the removal process. The Nail Steamer traps moisture and steam to circulate the air around the nails. The steam then penetrates beneath the product, softening and lifting it away from the natural nail. The Steamer Remover is a fast and efficient nail removal technology that creates a pampering experience for your clients—removing their gel polish in just minutes!
Please use NSI products like Polish Pro and follow the instructions for the best results.
Nail Steamer Remover Instructions:
The NSI Nail Steamer Remover should be used with your preferred nail remover solution, such as Soothing Soak-off Remover or Acetone.
This nail steamer remover is made to remove nail products that can be removed with acetone.
It works with the combination of 3 factors:
- Solvent Solution, e.g. Soothing Soak Off Remover or Acetone
- Warming of Solution to a medium heat generating steam and moisture assisting in a great advanced soak-off method!
- Time & Patience
Instructions:
- Place the Nail Steamer Remover machine on a hard, level and flat surface.
- Turn the Black Lid counterclockwise and lift it off to reveal the clear plastic bowls inside. (1 is a spare, leave it to the side)
- Pour approximately 8 ml of Soothing Soak Off Remover or Acetone into the clear plastic bowl/container. (This amount of liquid will be sufficient for both Hands.)
- Close the Black Lid back into its original and correct position.
Warning: DO NOT pour Acetone or Soothing Soak-off Remover directly into the Nail Steamer Remover. Doing so will damage its integrity!
Warning: You must use the clear plastic bowls included to pour the acetone!
Important Step – Do Not Skip:
- Use a Coarse Nail File like the NSI Endurance 100/100 Grit File or an 80/80 Grit File to first File and remove the Top Coat / Layer on your Nail Enhancements. This will allow the Nail Gel Steamer to penetrate more deeply and break down the products on your nails. Top Coats are made to be water—and solvent-resistant, so you need to file that off to let the Nail Steamer Remover go to work on the products underneath!
- Remove any glue, adhesive, nail rhinestones, or other nail blings from the top of your nails. These generally file off quickly and don't need to go in the Nail Steamer Remover.
Operating Nail Steamer Remover Instructions:
- Press the switch/button on the back of the Nail Steamer Remover to turn it ON.
- A red light on the front will appear on H for Heat, indicating that it is now heating up but not ready to use.
- After approximately 30 seconds, the Nail Steamer Remover will Beep, indicating and showing a green light on S for Start/Steam.
- Now, insert your Fingers into the Black Finger Compartments and wrap your fingers around the inside dome, gripping and forming a circle position with your fingers slightly apart. If you wish, you can also lower your fingers into the solution in the bowl; this gives a quicker option for harsh products such as Acrylics. "Also, start a Timer or take Note of the time on a clock."
- If you see the red light coming on intermittently throughout your soaking process, this is normal and just an indication that the Nail Steamer Remover is maintaining the required temperature. It is usual for your fingers to feel warm throughout this time; however, if they feel uncomfortably hot, remove them from the Nail Steamer Remover.
- At 5 minutes, you will hear 2 Beeps, indicating you are halfway through the removal process.
- At 10 minutes, you will hear 1 Beep, and the W will become Orange, indicating the steaming process has finished. It will stay on W for Warm.
- Remove your fingers from the nail steamer remover and use a cuticle stick or a cuticle pusher to quickly scrape off the loose and soft products. Be quick in this step because the products will begin hardening if your nails become cold and dry. If you feel you took too long, place your fingers back in the Nail Steamer Remover, let it warm up your nails, and soften the products again.
- Repeat step 8 until you have removed most, if not all, of the nail products you had on your nails. 🙂
- Buff / Lightly File your nails until perfectly clean, apply NSI Nurture Oil, and Turn Off the Nail Steamer Remover. Clean the clear plastic bowl inside the Nail Steamer, removing all debris from nail polish, gels, Acrylic, etc. Once clean and dried, the Nail Steamer Remover is ready for its subsequent use.
Helpful Tips:
Solvents like Soothing Soak Off Remover cool down and dry quickly once your fingers are removed from the Nail Steamer Remover, so being efficient and quick is essential.
You can pull out only one finger at a time from the Nail Steamer Remover to scrape the products off the nails. Then, change and proceed to the next finger. This way, the other fingers remain wet and warm inside the Nail Steamer Remover.
If some areas on your nails still have the product, use the same process again. It might take you some extra time to complete the process.
The timing can differ significantly for different enhancement and nail product lines.
If removal is not complete after one process, you might need to repeat the whole process twice, so just turn the Nail Steamer Remover off at the switch, turn it back on, and start again from step one.
Store away from children. Do not use if you have any skin abrasions, cuts, or open sores. Do not use if you are prone to allergies or allergic reactions.
The NSI Nail Steamer Remover removes nail products such as Acrylics, rubber base, Gel Polish, manicures, Nail Dipping Systems, and more. It is a must-have tool for any nail technician!
The NSI Nail Steamer Remover is designed to make removing gel polish simple and painless. The gel Steamer Remover heats and warms up your Soak Off Remover to speed up the removal of enhancement products. It is an excellent addition to any salon and a pampering upgrade from the old ways of removing nail products by soaking or wrapping them with foil—no more scraping and scrubbing to get your client's nails back to their natural state. After just a few minutes, you can easily wipe away the product. Then, the nails are ready for a new look.
It works by gently heating the Soothing Soak-Off Remover to speed up the removal process. The Nail Steamer traps moisture and steam to circulate the air around the nails. The steam then penetrates beneath the product, softening and lifting it away from the natural nail. The Steamer Remover is a fast and efficient nail removal technology that creates a pampering experience for your clients—removing their gel polish in just minutes!
Please use NSI products like Polish Pro and follow the instructions for the best results.
Nail Steamer Remover Instructions:
The NSI Nail Steamer Remover should be used with your preferred nail remover solution, such as Soothing Soak-off Remover or Acetone.
This nail steamer remover is made to remove nail products that can be removed with acetone.
It works with the combination of 3 factors:
- Solvent Solution, e.g. Soothing Soak Off Remover or Acetone
- Warming of Solution to a medium heat generating steam and moisture assisting in a great advanced soak-off method!
- Time & Patience
Instructions:
- Place the Nail Steamer Remover machine on a hard, level and flat surface.
- Turn the Black Lid counterclockwise and lift it off to reveal the clear plastic bowls inside. (1 is a spare, leave it to the side)
- Pour approximately 8 ml of Soothing Soak Off Remover or Acetone into the clear plastic bowl/container. (This amount of liquid will be sufficient for both Hands.)
- Close the Black Lid back into its original and correct position.
Warning: DO NOT pour Acetone or Soothing Soak-off Remover directly into the Nail Steamer Remover. Doing so will damage its integrity!
Warning: You must use the clear plastic bowls included to pour the acetone!
Important Step – Do Not Skip:
- Use a Coarse Nail File like the NSI Endurance 100/100 Grit File or an 80/80 Grit File to first File and remove the Top Coat / Layer on your Nail Enhancements. This will allow the Nail Gel Steamer to penetrate more deeply and break down the products on your nails. Top Coats are made to be water—and solvent-resistant, so you need to file that off to let the Nail Steamer Remover go to work on the products underneath!
- Remove any glue, adhesive, nail rhinestones, or other nail blings from the top of your nails. These generally file off quickly and don't need to go in the Nail Steamer Remover.
Operating Nail Steamer Remover Instructions:
- Press the switch/button on the back of the Nail Steamer Remover to turn it ON.
- A red light on the front will appear on H for Heat, indicating that it is now heating up but not ready to use.
- After approximately 30 seconds, the Nail Steamer Remover will Beep, indicating and showing a green light on S for Start/Steam.
- Now, insert your Fingers into the Black Finger Compartments and wrap your fingers around the inside dome, gripping and forming a circle position with your fingers slightly apart. If you wish, you can also lower your fingers into the solution in the bowl; this gives a quicker option for harsh products such as Acrylics. "Also, start a Timer or take Note of the time on a clock."
- If you see the red light coming on intermittently throughout your soaking process, this is normal and just an indication that the Nail Steamer Remover is maintaining the required temperature. It is usual for your fingers to feel warm throughout this time; however, if they feel uncomfortably hot, remove them from the Nail Steamer Remover.
- At 5 minutes, you will hear 2 Beeps, indicating you are halfway through the removal process.
- At 10 minutes, you will hear 1 Beep, and the W will become Orange, indicating the steaming process has finished. It will stay on W for Warm.
- Remove your fingers from the nail steamer remover and use a cuticle stick or a cuticle pusher to quickly scrape off the loose and soft products. Be quick in this step because the products will begin hardening if your nails become cold and dry. If you feel you took too long, place your fingers back in the Nail Steamer Remover, let it warm up your nails, and soften the products again.
- Repeat step 8 until you have removed most, if not all, of the nail products you had on your nails. 🙂
- Buff / Lightly File your nails until perfectly clean, apply NSI Nurture Oil, and Turn Off the Nail Steamer Remover. Clean the clear plastic bowl inside the Nail Steamer, removing all debris from nail polish, gels, Acrylic, etc. Once clean and dried, the Nail Steamer Remover is ready for its subsequent use.
Helpful Tips:
Solvents like Soothing Soak Off Remover cool down and dry quickly once your fingers are removed from the Nail Steamer Remover, so being efficient and quick is essential.
You can pull out only one finger at a time from the Nail Steamer Remover to scrape the products off the nails. Then, change and proceed to the next finger. This way, the other fingers remain wet and warm inside the Nail Steamer Remover.
If some areas on your nails still have the product, use the same process again. It might take you some extra time to complete the process.
The timing can differ significantly for different enhancement and nail product lines.
If removal is not complete after one process, you might need to repeat the whole process twice, so just turn the Nail Steamer Remover off at the switch, turn it back on, and start again from step one.
Store away from children. Do not use if you have any skin abrasions, cuts, or open sores. Do not use if you are prone to allergies or allergic reactions.